How to solve the problem of DC motor abnormal sound？

How to solve the problem of DC motor abnormal sound？

There are many kinds of DC geared motor common fault, here I will talk about it when a failure in the problem of sound, this is also one of the most common problems, why there is a different ring and how to repair? 

vibration-motor

If there is no axial channeling dynamic collision caused by the armature, should be a structure have loose phenomenon. Everyone please remember a principle: The pole on the gasket shouldn’t be got rid of more often, this will affect the motor performance and running state, about the problem of noise here is the following method: open the electric control system of the motor power supply access oscilloscope waveform is there lack of wave head, lacks can produce vibration and noise, then check the compensation coil and armature connection, if failed it may be the magnetic circuit is too strong, electromagnetic noise, you can put the motor to at the rated speed, to see whether there is in a certain range, and then cut off the power supply. Then to see whether there are noise in the process of slowing down, if not that is electromagnetic noise can be determined, if not it should be mechanical issues. 

explosion-proof-vibration-motor

So, we in the future when using gear motor, ensure that every time it is in the correct operation, also we can't forget the more at ordinary times of maintenance, it is a good way to prevent or reduce the problem.

rock-loader-motor

PK Machinery has been exporting belt conveyor, bucket elevator, scraper conveyor, screw conveyor, vibrating screen and other spare parts for many years. We do believe business between our customers and us can develop fast. Any enquiry, please contact us!

Tel:+863735799198

Fax:+863735071699

E-mail:info@pkmachinery.com

Website:www.pkmachinery.com

The Traction Components and Tensioning Methods of Bucket Elevators (2)

This article is the continuation of previous one which is more knowledge about traction components and tensioning methods of bucket elevators.

3.Heavy hammer tensioning, heavy hammer directly putting the force on the part of lower bearing housing via its supportive stand, This resulted with the lower part is tied up with the respective components throughout its sprocket. By comparing to the hammer lever tensioning method, it has the same tensioning achievement, but it is heavier. Therefore, it has often been used at the plate chain elevator which has heavier components. Occupied smaller space and it is an automatic tensioning method.

4.Compound tensioning, it is a combination of heavy hammer and mechanical spring, the pressure is applying on the bearing at the lower part of the machine. And this causes the lower drive wheel to tie up. A set of compression spring is added in the between of heavy hammer and lower bearing, so that the tail part wheel axis contains certain buffering effect to overcome the pressure when it is overload. However, please remind that both sides of the hammer block have to be equal weight to prevent imbalance.

In addition, PK machinery supplies belt conveyor, bucket elevator, vibrating screen etc. for several years. With abundant engineering design experience, professional technical ability and strict fabricating specification, PK machinery wins the highly praise from clients all over the world, any inquiry, please feel free to contact us!

Website:www.pkmachinery.com
E-mail: info@pkmachinery.com
Tel: +86 373 579 9188
Fax: +86 373 507 1699
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China