The Difference between Tapered self-aligning roller and Friction self-aligning roller

Tapered self-aligning roller is similar with Friction self-aligning roller in structure which are mentioned when introduce the belt conveyor, their purpose is protecting belt and preventing belt deviation. However, in the process of actual use, there is a big difference between them.
The main difference:

Tapered self-aligning roller

1.Stability performance: these two kinds of roller have their own advantages and disadvantages. Tapered self-aligning roller provides a more stable transport environment for belt and material, but since the tapered roller with a certain angle, if carries the material for a long time, it will increase the radial offset of roller. While friction self-aligning roller has a stable structure so that it can carry material for a long time and won’t be influenced. but there is a certain angle between belt and roller due to design of friction pulley, the joint degree of friction self-aligning roller is lower than tapered self-aligning roller, which will reduce the stability performance of belt conveyor.
2.Friction coefficient: concerning this aspect, tapered self-aligning roller has advantage over the friction self-aligning roller, tapered self-aligning roller has a special body design of roller, it could extremely increase joint degree of belt and roller to make the belt adapt to tapered roller, it also greatly reduce the force of friction.

Friction self-aligning roller

3.Sealing Performance: the sealing performance of friction self-aligning roller is better than tapered self-aligning roller, the friction one adopts the design with independent installation of the friction pulley to promise a good sealing performance, however, because tapered self-aligning roller has a different diameter of pipe, it increase the difficulty of seal, meanwhile, performance of seal is also reduced.
4.Production cost: the structure and technology of tapered self-aligning roller are much simpler, so the cost is low, but if in the long run of using, the friction self-aligning roller is more stable and durable.
If you want to know more information, please click the following link:www.pkmachinery.com

The Video show you the introduction of Conveyor Belt Roller

The Video show you the introduction of Conveyor Belt Roller

Belt conveyor roller has the highest quantity and is the most carrying parts of belt conveyor. Impact roller, friction centering carrier roller, belt conveyor roller, and so on are included. It plays the main role to support the belt conveyor and the weight of material, so the conveyor belt works smoothly. Here PK Machinery will show you a better understanding about it.Hope the following video will help you.

This video show that the conveyor belt Idler is mainly composed of steel pipe, shaft, bearing, bearing block, labyrinth seal, etc.It is the complete manufacturing equipment for conveyor belt rollers/idlers in our factory.How much do you know the working of the conveyor belt roller?Here the video will show you the processing of conveyor belt roller.Wish it can help you have a better understanding.

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

Tel: +86 373 579 9198

Fax: +86 373 507 1699  

info@pkmachinery.com  

website:www.pkmachinery.com

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China

How to solve the problem of DC motor abnormal sound？

How to solve the problem of DC motor abnormal sound？

There are many kinds of DC geared motor common fault, here I will talk about it when a failure in the problem of sound, this is also one of the most common problems, why there is a different ring and how to repair? 

vibration-motor

If there is no axial channeling dynamic collision caused by the armature, should be a structure have loose phenomenon. Everyone please remember a principle: The pole on the gasket shouldn’t be got rid of more often, this will affect the motor performance and running state, about the problem of noise here is the following method: open the electric control system of the motor power supply access oscilloscope waveform is there lack of wave head, lacks can produce vibration and noise, then check the compensation coil and armature connection, if failed it may be the magnetic circuit is too strong, electromagnetic noise, you can put the motor to at the rated speed, to see whether there is in a certain range, and then cut off the power supply. Then to see whether there are noise in the process of slowing down, if not that is electromagnetic noise can be determined, if not it should be mechanical issues. 

explosion-proof-vibration-motor

So, we in the future when using gear motor, ensure that every time it is in the correct operation, also we can't forget the more at ordinary times of maintenance, it is a good way to prevent or reduce the problem.

rock-loader-motor

PK Machinery has been exporting belt conveyor, bucket elevator, scraper conveyor, screw conveyor, vibrating screen and other spare parts for many years. We do believe business between our customers and us can develop fast. Any enquiry, please contact us!

Tel:+863735799198

Fax:+863735071699

E-mail:info@pkmachinery.com

Website:www.pkmachinery.com

The daily Care and Maintenance of Motorized Pulley

Are you in trouble with maintaining and repairing motorized pulley when operate the belt conveyor? Come and check this article ,we are sure you will get a satisfied solution ! 
1. In order to create a good condition for normal operation, please check the surrounding environment, fastening bolts, oil leakage, the cable before each start-up.
2. Please start a new pulley with inching running, then it will turn into normal gradually, please check the machine vibration, noise, and temperature heating of each operating component after running for 10 minutes.
3. If oil leakage happens to motorized pulley, please pay attention to check two parts: one is oil seal, check it whether has wear and tear or deformation phenomenon, if any, please replace the cage oil seal timely; the other one is that the air outlet can’t be blocked, if there is blockage, the deposition of dust, grease and sundries shall be removed as soon as possible to ensure smooth access.
4. Regularly check the oil level in the drum is an important part of the daily maintenance, besides, regulation of the oil level height is one of the conditions to ensure the normal operation of the pulley. Inspection methods can be referred according to operation manual.

What Should Users Notice before Running the Motorized Drum with Anti-reverse?

Recently, we received a feedback from our Thailand client that the motorized drum with anti-reverse of belt conveyor didn’t rotate, here PK Machinery will explain the notice we should note which can avoid this problem effectively:
1.After installation of the whole set belt conveyor, we should check the motorized drum carefully before commissioning, check and make sure the power supply must be identical to the one stipulated by the nameplate.
2.If the motorized drum with anti-reverse, the wires connection must rotate according to the indicated rotate direction.

 

 3.Check if the oil level of the drum body is satisfied before running. The methods are suggested as below: 
Rotate the drum body, keep the oil outlet as high as 2/3r, see the following figure, then remove the plug and make sure the oil surface is level with the outlet.
(This is important, if without oil, the motorized drum will occurs much noise, even not rotate, and finally it will damage)

Lubrication of Rigid Impeller Feeder

Add sufficient 00# lithium lubricating grease to reducer of rigid impeller feeder,within 6-10 months of being put into use, the transmission and bearing parts of rotary valve should be replaced and the grease also need to be changed. If rotary valve works in a high ambient temperature, humid or too much air return, please shorten the time of changing the new grease.
During operation, please check the lubrication parts every month.
Above mentioned lubrication time is just the minimum requirements, detailed time should be flexible and depends on the operation condition.

 

List of Lubrication parts
 

No.	Name of Lubrication part	Lubrication material	Lubrication part cycle	Lubrication method
1	Coupling	2# lubricating grease	1000 hours	Lubricator
2	Bearing seat	3# calcium base grease	1 month	Lubricator
3	Gearmotor	00# lithium lubricating grease	6 months	Lubricator

Introduction of YZO vibration motor

YZO vibration motor has an extremely wide application scope in many engineering projects as it is a universal type of motor, such as the vibrating equipment used in hydropower construction, building materials, chemical, mining, coal, metallurgy industries etc. The vibrating equipment includes vibrating crusher, vibrating screen, vibrating packing machine, vibrating shake-out machine, vibration molding machine.
The exciting source of YZO vibratory motor is produced by power source and vibration source, the exciting force can be adjusted steplessly and it is easy to operate. 

YZO vibrator motor is not only can be applied in general vibrating equipment, but also can work in the forms of a combination of a variable vibration types, such as planispiral, spiral, shaking vibration, combination straight line, combination of long elliptic,compound double amplitude ,these vibration forms can produce new vibration equipment.

-------------------------------------------------------------------------

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, Vibrating screen, Bucket elevator, Screw conveyor, and Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation.

Henan Pingyuan Mining Machinery Co., Ltd 

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China. 

Tel: +86 373 579 9198

Fax: +86 373 507 1699

Email Address: info@pkmachinery.com

Official Website: http://www.pkmachinery.com/